User Manual

FX10 WiFi 6 Mesh Extender
10
1. Place your Mesh extender closer to your Mesh controller.
For more information, see Place your WiFi 6 Mesh Extender section.
2. Check the WiFi Mesh Controller mode on your FX20 router.
The router
Once the Mesh controller mode is enabled, it will turn on Amber color.
Otherwise, please turns on the Mesh controller mode by going through your router’s Web UI where
the WiFi Mesh menu in the Wireless is placed.
For more information, see Wireless > WiFi Mesh section in the FX20 WiFi 6 User Guide.
3. Connect your Mesh extender to a power source.
The Power LED turns on white and the Mesh LED turns on white.
If the Mesh LED pules white, your Mesh extender will try to find and sync to your Mesh controller
automatically.
For more information, see Turn on the Device section.
4. Press the WPS button on your FX20 router for 3 seconds.
The WPS LED pulse Amber until your Mesh extender will be successfully synced.
This process time will have up to 5 minutes for syncing your Mesh extender.
5. Press the Mesh-Link button on your Mesh extender for 3 seconds.
Within 5 minutes, press the Mesh-Link button on the back of your mesh extender. It will attempt to
sync to your Mesh controller.