FX10 WiFi 6 Mesh Extender FX10 WIFI 6 MASH EXTENDER USER MANUAL JEXtream AX1800 Franklin Wireless Corp i
FX10 WiFi 6 Mesh Extender Table of Contents Introduction ................................................................................................................................................. 3 Overview....................................................................................................................................................... 4 Parts and Functions.............................................................................................................................
FX10 WiFi 6 Mesh Extender Introduction The WiFi 6 Mesh Extender (model: FX10) will extend your wireless coverage along with the WiFi 6 router (model: FX20) that will connect to your modem or gateway. The WiFi 6 Extender connects to the WiFi 6 router and extends the WiFi signal throughout your whole home mesh WiFi system. Basically, the WiFi 6 router is turned on the WiFi Mesh controller operation, it will allow to connect of the WiFi 6 Mesh Extender.
FX10 WiFi 6 Mesh Extender Overview The following topics give you all the information you need to set up your router for the first time. Parts and Functions The WiFi 6 Mesh Extender (model: FX10) enables to extend your whole home mesh WiFi coverage along with the better performance by ensuring more available bandwidth with less congestion for all connected devices on network.
FX10 WiFi 6 Mesh Extender This Box Contains Your package contains the following items: FX10 Mesh Extender Cradle QSG Power Adapter WiFi 6 Mesh Extender Overview The following numbers on Front and Rear panels indicate interface detail: (1) LINK Status LED (2) Power Status LED (3) MESH Status LED (4) MESH LINK Button (5) RESET Button (6) RJ-45 LAN Port (7) RJ-45 LAN Port (8) Power IN 5
FX10 WiFi 6 Mesh Extender Wall Mount Cradle This FX10 with the Wall mount cradle by attaching the power adapter is designed to install your WiFi 6 Mesh extender a snap and reduce cord clutter. 1. 2. Mount the WiFi 6 Mesh extender on the Cradle’s holder. Attach the Cord cable of the power adapter on the Cradle's back side. 3. Move it to any position you want as long as there is a socket. Turn on the Device Plug USB type C Power Adapter to device, then connect to wall.
FX10 WiFi 6 Mesh Extender LED Behaviors The following table describes the LED indicators that is located on the router front view. LED Description LINK • Solid white – The Mesh extender is synced with the Mesh controller (FX20 router) and is working normally. • Off – Unable to sync with the Mesh controller. • Solid white – The Mesh extender is ready to sync with the Mesh controller (FX20 Router).
FX10 WiFi 6 Mesh Extender Back Panel Button and Connector The following table describes the hardware features on the router back view. Button Description DC-IN USB Type C Power Connector Mesh-Link Pressing the Mesh-Link button for 3 seconds, this Mesh LED is blinking and attempting to sync with the Mesh controller (FX20 Router). The blinking during this process stays on up to 6 minutes. Pressing the RST button for 5 seconds, your device will restart.
FX10 WiFi 6 Mesh Extender Link Your Device The following topics give you all the information you need to set up your device and wireless service for the first time. Place your WiFi 6 Mesh Extender Your Mesh extender must be within range of your Mesh controller’s WiFi coverage in order to sync with it. Indicates the Mesh LED color to RED where to place your Mesh extender in the wickedness WiFi signal. Closer it to your Mesh controller.
FX10 WiFi 6 Mesh Extender 1. Place your Mesh extender closer to your Mesh controller. For more information, see Place your WiFi 6 Mesh Extender section. 2. Check the WiFi Mesh Controller mode on your FX20 router. The router Once the Mesh controller mode is enabled, it will turn on Amber color. Otherwise, please turns on the Mesh controller mode by going through your router’s Web UI where the WiFi Mesh menu in the Wireless is placed.
FX10 WiFi 6 Mesh Extender The Mesh LED pulse white until your Mesh controller will be successfully synced. This processing time will take up to 6 minutes for syncing your Mesh controller. The Mesh LED will stay in White Color.
FX10 WiFi 6 Mesh Extender Setup Your Device The following topics give you all the information you need to set up your device and wireless service for the first time. Step1) Access your FX20 device’s Web UI Launch an internet browser from a computer or mobile device that is connected to the network. Accessing other menus requires admin log in. 1. Type http://router.jextream.net or http://192.168.10.1. 2. Login window open and enter password and click "Log in" button.
FX10 WiFi 6 Mesh Extender For more information, see Wireless > WiFi Mesh section in the FX20 WiFi 6 Router User Guide. Step3) Check Mesh Client List Go to the Wireless > WiFi Mesh section from the FX20’s Web UI and check the Mesh Client List in order to see the connected Mesh Extender list. Once the Mesh extender will join the Mesh controller, it will display the client list along with the Mesh extender MAC Address and an IP Address assigned.
FX10 WiFi 6 Mesh Extender Appendix The following topics cover items such as troubleshooting, device specifications, applicable warranty and service information, customer service contacts, and applicable trademark and copyright notices. Troubleshooting Check below for troubleshooting solutions for common device issues.
FX10 WiFi 6 Mesh Extender Issue: Reset your Mesh Extender Your Mesh extender failed to sync. Try repeating Do not connect your Mesh extender section. If the sync keeps failing, try moving the Mesh extender to a different location that’s closer to the Mesh controller. If the sync keeps failing again, press the RESET button on the Mesh extenders back side for 10 seconds, and then, it will perform to reset your Mesh extender by the Factory value.
FX10 WiFi 6 Mesh Extender Specifications The following tables list the specifications for the mobile broadband device, the AC charger, and the materials. Item Description Model name FX10 WiFi 6 Mesh Extender Dimensions1 W 94.
FX10 WiFi 6 Mesh Extender Materials Specifications Parts Materials/Finishing A cover PC(Black),SF coating B cover PC(Black) Battery cover PC(Black),SF coating A deco PC(Black),UV(Gloss 80%) Rubber feet Silicon(Black) 17
FX10 WiFi 6 Mesh Extender Warranty and Service The following topics outline your device's warranty and service information. Warranty Your device purchase includes Warranty. ● Confirm shop name and purchase date. ● Read contents of Warranty and keep it in a safe place. ● Check warranty period in the Warranty. Services Before submitting your device for repairs, contact Service Provider’s Customer Service or General Information; be prepared to describe the problem in detail.
FX10 WiFi 6 Mesh Extender FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
