Mobile Broadband Modem X720 User Manual Franklin Access Manager™
CONTENTS 1. BEFORE USING X720 ........................................................................................ 3 About This User‟s Manual ............................................................................... 4 Product Overview ........................................................................................... 4 Product Package Contents ................................................................................ 4 Introduction to X720 Express Card ...............................
Section 1, 1.
About This User’s Manual This user manual contains all the necessary information regarding the device installation and how to use the modem for your internet navigation. Please make sure that you are familiar with the device operation by carefully reading this user manual before using the X720 LTE and EVDO Express Card modem. Instructions Install the Franklin Access Manager™ software by inserting the X720 Install Program CD into your PC. The installation software CD is included in the X720 modem package.
Introduction to X720 Express Card The X720 is designed for the Express Card slot on your computer, which is available in most PC models. The X720 allows you to Access the Internet, Send and receive SMS and e-mail Access your corporate network through VPN With X720, you are always connected whether you are away from home, on the road, or wherever wired Internet access is not readily available.
Configuration To use the X720 on your computer, you need to install the Franklin Access Manager™ software included in the modem package and configure the X720 device. See the next section for more information on software installation and X720 device configuration. The following section will guide you through the installation and setup process for Franklin Access Manager™ software. Before getting started, you should become familiar with the documentation that came with your X720 Express Card.
Section 2, 2.
This section will guide you through the installation and setup process for Franklin Access Manager™ software. Before getting started, you should become familiar with the documentation that came with your Express Card. Installing Software Warnings Make sure to complete the unplugging/ejection process before removing the X720. If you remove the device improperly, the modem may be damaged. Notes If you have inserted the device properly, Windows will inform you of the new hardware.
Setup Program for Windows STEP 1: The “Welcome to the Franklin Access Manager Setup Wizard” screen appears. Click the [Next] button to continue with the installation process. .
STEP 2: You are now ready to select the location on your computer where Franklin Access Manager™ will be installed. It is recommended that you do not modify the default destination folder. Click the [Next] button to continue.
STEP 3: During this step the components of Franklin Access Manager product are being installed onto your computer. Installation will occur to the destination folder specified in Step 2.
STEP 4: Installation of Franklin Access Manager is now complete. Click the [Close] button to leave the Franklin Access Manager setup program and begin using your new software. ※ The setup program will automatically create a Franklin Access Manager shortcut on your desktop. STEP 5: Please wait while X720 is installed and ready to use.
Setup Program for Mac OS X STEP 1: Insert X720 into the PC, then X720 CD disk drive should be automatically mounted. Double click X720 CD icon on the Desktop. Double click the Franklin Access Manager Setup icon to launch the installer. STEP 2: Click [Continue] button in the welcome window to proceed with the installation.
STEP 3: The Read Me file appears. Click the [Continue] button. STEP 4: Click “Install” to begin the standard installation on system volume STEP 5: Finally, the Setup Wizard shows confirm window, click the [OK] button to continue. Enter the Name/Password used to log into the computer then click „OK‟.
STEP 6: Franklin Access Manager installation begins. STEP 7: Installation is now complete. Click „Restart‟ button to close the setup wizard. Then OS is restarted.
Section 3, 3.
Franklin Access Manager™ is a connection manager application for X720 Express Card. It allows you to manage and monitor the Internet connection between your computer and the wireless network. It has user friendly interface and is equipped with many useful features that will enhance your internet navigation experience.
Getting Started Double click on the Franklin Access Manager icon on your desktop or click on the Windows Start menu and select Franklin Access Manager from the list of programs. Connecting to the Internet Once your device is properly configured, connecting to the Internet is as simple as clicking the “Connect” button. Once connected, the “Connect” button will change to “Disconnect”. Simply click this “Disconnect” button to end your current connection.
The Status Bar Information regarding your current network connection can be seen in the status bar along the bottom of Franklin Access Manager interface. For more information on this status bar, see the section “The Status Bar” in the “Additional Features” section. Franklin Access Manager will display status information at the bottom during the connection process as well as while connected.
Section 4, 4.
The Session Menu Connect / Disconnect: Use this button to connect or disconnect the wireless networks. Statistics: At any time during your connection you can check your current connection speed and throughput stats in the Statistics window. To see this window, select “Statistics” from the “Session” menu.
The Tools Menu Log: This feature provides a concise session log of your network activity. Click on a column heading to sort the log. This window also displays the total number of sessions as well as the total connected time. The information displayed in the Usage log can be customized using the controls that appear just below the list. To view only the connection history of a specific network type, check the “Selected connection” checkbox and select the desired type from the drop-down list.
The Options Menu [Preferences] (1) General Tap Starting Options Run Connection Manager at Startup: If this option is checked the Franklin Access Manager starts automatically when Windows starts. Show Splash Window: Display splash window when Franklin Access Manager starts. Minimize Application into Tray: When you minimize the application it will now appear in the Windows task bar. To restore the application click on Franklin Access Manager tray icon, and select[Open].
(2) WWAN Specific Settings When Connected: This is used to set various WWAN connection settings. Open Web Browser: If it is checked, y, Franklin Access Manager will launch the default web-browser automatically when the data connection is established successfully. Go to URL: Use this option to enable web-browser go to web site you defined using URL field below. URL: Website URL for starting page of web browser started automatically upon connecting to the Franklin Access Manager network.
(3) LBS settings This feature allows Franklin Access Manager software to setup LBS options. LBS Options: Enable/Disable LBS function and confirmation screen for Privacy Consent Agreement. Mapping & Search Services: You can choose the map service for result of „Location & Search Services‟. GPS Testing: You can see current GPS signal level and perform functionality test. If you click the button „Test GPS‟, test results will be updated.
(4) VPN Settings VPN Options None: Do not use VPN Microsoft VPN: Use VPN client of Microsoft Windows. External VPN Application: Use other VPN client application provided another vendor. Specify other VPN client application. To choose the application from your local disk, click“” button. Profile (Microsoft VPN only): Select Microsoft VPN Profile.
(5) Update settings This feature allows Franklin Access Manager software to check for software updates and it can be updated manually or automatically. Update Option Manually: If you choose this option, the software will only check for update when you select “Update Now” button or select “Help”, then “Check for updates” from main screen. Automatically: You can allow the software to automatically check for updates, daily, weekly, or monthly.
The Help Menu Contents: It provides contents for additional information. Check for Updates: Select this option to check for the available latest software.
Additional Features In addition to the basic features mentioned in previous sections, Franklin Access Manager has the additional features listed below. Status Bar The details of your current connection can be seen in the status bar at the bottom of Franklin Access Manager interface. This status bar is always visible when the interface is fully expanded. Connection Status The text on the status bar reflects your current state. During an active connection, this text will change to “Connected”.
Throughput The amount of data that you have sent and received since the current network connection was initiated can be seen by holding the mouse over. Elapsed Time The amount of time that has elapsed since the current network connection was initiated is tracked on the lower left side of the status bar.
Section 5, 5. INSTALLING X720 Recommended System Requirements Remove the Modem from your computer Trouble Shooting Care and Maintenance Warranty SAR Information Safety Information U.S.
Recommended System Requirements To successfully install and use the X720 modem in your PC, the following system specifications are required. Item Operating system Required Specification Windows® 2000/XP/Vista/7 Mac OS X 10.4/10.5/10.6 Card Slot Express Card Slot Processor/Memory Minimum required system to support the above OS Remove the Modem from your Computer Remove the X720 from your laptop. When removing the modem, always use the push button of the Express Card slot and pull modem carefully.
CARE AND MAINTENANCE Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. (a) Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. (b) Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. (c) Do not store the device in hot areas.
The Company disclaims liability for removal or reinstallation of the product, for geographic coverage, for inadequate signal reception by the antenna or for communications range or operation of the cellular system as a whole. When sending your wireless device to Franklin Wireless‟ authorized distributions for repair or service, please note that any personal data or software stored on the device may be inadvertently erased or altered.
SAR INFORMATION THIS MODEL MODEM MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless modem is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
U.S.A. U.S.
