User's Manual

U600 Mobile Broadband Modem
17
Franklin Access Manager™ is a connection manager application for U600 USB modem. It
allows you to manage and monitor the Internet connection between your computer and
the wireless network. It has user friendly interface and is equipped with many useful
features that will enhance your internet navigation experience.
Features
WWAN (Wireless Wide Area Network, 1xEV-DO/1xRTT/CDMA/WiMAX)
Specific Features:
 Configures your computer to use your USB Modem
 Creates a Data Connection for your USB Modem
 Copies utility to create wireless copies of your dial-up connections, if supported by
your device
 Test function for WWAN device
※ A WWAN capable device is required to use the WWAN features. Individual WWAN
features are also device dependent as described in the WWAN section above.
Other Features:
 Logs connections used, duration of the usage, and bytes sent and received.
 See the section “Additional Features” for more information about the features of
Franklin Access Manager™ software.
WiMAX-Specific Items
In addition to the standard items, the WiMAX Connections Interface contains the
following:
 CINR
Carrier to Interference + Noise Ratio- This is an indication of how strong the desired
signal is compared to any interfering signals and noise.
 Received Signal Strength
The strength of the received signal is displayed as both a value in dbm and as the
familiar signal strength bar graphic.
 Center Frequency
The center frequency used by your current WiMAX connection.