User's Manual

Page 36 / 48 Copyright © 2013 Franklin Wireless Corp.
Ring / Sound Menu (Option 1)
Ring Type
(Option ##11)
- There are 9 ring types.
- You can select ‘1~9.’ After selecting the desired ring type, press ‘’ to store the ring type.
- If you choose ‘0’ key instead of ‘’, the selection will be cancelled.
- If you press ‘#’ to exit.
Ex) ##11  0 or #  cancel. It will make a terminal to idle status.
##11  1 ~ 9 (assign ring tone)   : Index 1’s ring tone will be selected.
Volume Type
(Option ##12)
- You can adjust the ring volume.
- Press ‘1’ to increase volume, and press ‘2’ to decrease volume.
- Once the preferred volume level is selected, press ‘’ to save or press ‘#’ to cancel and exit.
DTMF
(Option ##13)
- You can select DTMF tone length.
- Press ‘’ to increase the tone length, press ‘#’ to reduce the tone length (DTMF).
1 Min Alert
(Option ##14)
- You can set/remove the 1 Min alert notification.
- If you press ‘’ to set this option, the phone will notify alert to you one minute later during the conversation.
- If you want to remove this option, press ‘#.’
Service Alert
(Option ##15)
- You can set/remove the Service alert notification.
- If you press ‘’ to set this option, the phone will notify alert to you in and out Service Area.
- To remove this option, press ‘#.’