User's Manual

Page 21 / 48 Copyright © 2013 Franklin Wireless Corp.
- WWAN Modem Status displays the following:
 Router’s manufacturer
 Router’s model name
 Router’s firmware version in use
 Mobile Station International ISDN Number (MSISDN)
 International Mobile Equipment Identity (IMEI)
 Universal Integrated Circuit Card Identity (UICCID)
 International Mobile Subscriber Identity (IMSI)
 PRL version in use.
 USIM State (Active, Inactive)
 Connection status information (Connected, Disconnected, Dormant)
 Data Service type (LTE, EVDO Rev.0, EVDO Rev.A, eHRPD, 1xRTT, or No Service)
 Data Roaming Status (Yes, No)
 RSSI (Received Signal Strength Indicator, dBm) Level
- WWAN Modem Preferred Mode Settings have the following options:
 LTE/CDMA: the modem will operate and search a network automatically
 1xRTT Only : the modem will operate on 1xRTT network
 EVDO Only : the modem will operate on EVDO network
 CDMA + EVDO Only : the modem will operate with 1xRTT or EVDO network
 LTE Only : the modem will operate on LTE network
- WWAN Modem Data Roaming Setting item is used to set the roaming conditions between other operators
(currently roaming service is only available for EVDO networks and availability depends on your network
operator’s policy).
 eHRPD enable: Enabling the roaming service
 eHRPD disable: Disabling the roaming service
- WWAN Modem APN Setting item is allowed to set your operator’s APN (Access Point Name) information.