User Manual

PREFACE Page P - iii P
Figure P - 1 TS-1001
&
TS-2001 Model ATG Consoles
Alarms and Warnings –
Alarms and warnings are designed to alert you / make you aware of a problem when it
occurs so you can take appropriate corrective action. System hardware fail warnings, tank
related alarms, leak detection sensor alarms, and line leak alarms can be custom-
programmed to do many things. These events that require
programming
are denoted by
a (
p
) below:
– cause the red Alarm light or yellow Warning light to flash (standard)
– activate / sound the console annunciator alarm horn (
p
)
– activate output relay(s) /
optional
external alarm device (
p
)
– print alarm reports automatically at the report printer (
p
)
– send reports to remote location(s) –
optional TS-FM2 fax/data modem req’d ( p )
Tank Sentinel
®
Features
• The Models TS-1001, 504 & 750 can monitor product in up to 4 tanks
• The Models TS-2001 & 508 can monitor product in up to 8 tanks
• The TS-1001 can monitor up to 12 leak detection sensors internally
• The TS-2001 can monitor up to 24 leak detection sensors internally
• The TS-504 , 508 & 750 can monitor up to 8 leak detection sensors internally
• External sensor expansion capability — all consoles can be expanded with 1 or 2
external TS-SEM sensor expansion modules — for an additional 8 or 16 sensors inputs
• All consoles use advanced technology and can be custom programmed to operate per
your specific needs and management style
• All models can be programmed to create logical groups of sensors or tank limits
(i.e. by tank, by monitoring well fields, by product type, or by product limits)
• TS-1001/2001 consoles can be programmed for automatic operation and generation
of reports, and to comply with your local EPA regulatory requirements – for leak testing
and leak detection
• All consoles can be equipped with an
optional
TS-FM2 internal fax-modem — deliveries,
alarms, reports, and test data can be sent to remote locations
TS-1001 TANK SENTINEL
®
TS-2001 TANK SENTINEL
®