User Manual

Tank Sentinel Reports Page 3 - 17 3
Sensor Status REPORT
Shows the Sensor name, the sensor input-channel number,
and the current status of each sensor that is wired to the
system (OK or ACTIVE in alarm / leak detected). Also, CVS
data will be shown on the report when CVS has been
programmed (enabled).
Press: Press:
Report Choices
+
Standard Sensor 7
is active / in alarm.
TSP-HIS Sensor 8
is active / in alarm.
Vapor Sensor # 5
is not in alarm.
Sensor 4 is assigned to
CVS Tank 4.
Sensor 5 is assigned to
CVS Line 1.
Vapor Sensor REPORT
Shows the Sensor name, the sensor input-channel number,
and the current detailed readings from each vapor sensor
that is wired to the system. RVU = Relative Vapor Units. The
sensor will alarm when the present reading is equal to or
greater than the setpoint (OK or ACTIVE in alarm / leak
detected).
See Chapter 2 & 5 about Sensors and Sensor Alarms.
JW
REPORT
9
Sensor Reports:
Status M1
Choose Printer
or Fax
Vapor M2
Choose Printer
or Fax
M1
KX
DOWN
SPACE
NOTE
☞
INCON
INTELLIGENT CONTROLS INC.
P.O. BOX 638
SACO ME 04072
1-800-984-6266
04/30/2002 10:08 AM
SENSOR STATUS REPORT
SENSOR NO. 1
SENSOR 1
OK
:
:
SENSOR NO. 7
SENSOR 7
STANDARD SENSOR ACTIVE
SENSOR NO. 8
SENSOR 8
LOW BRINE LEVEL ACTIVE
TANK COMPLIANCE
CVS TANK 1
SENSOR NO. 1
:
:
CVS TANK 4
SENSOR NO. 4
LINE COMPLIANCE
CVS LINE 1
SENSOR NO. 5
:
:
CVS LINE 4
SENSOR NO. 8