User Manual

3 Page 3 - 2 Tank Sentinel Operator’s Guide
How to Print a Report (steps):
1) Press the key
2) Press the
DOWN key to show more
choices when UP / DN or MORE is
displayed
3) Press
menu keys ( M1 — M4 ) to
make a selection
4) Press the
M1 menu key to print a
report at the printer
FAXing a Report
See Printing a Report and follow steps 1 through 3, but press the M2 menu key to
FAX the report... see Report(s) Sent to Remote Fax Machines in this Chapter .
Where are Fax’d Reports Sent ?
The FAX numbers programmed in the setup mode are where the:
• Delivery reports,
• Alarm reports (all alarms),
• Leak reports (static tank leak tests),
• Line reports,
• SCALD reports ( statistical-continuous tank leak tests ... not static ), and all
• Reports scheduled, or manually selected from the keypad for fax transmittal.
The default FAX call numbers for each of these are blank and must be setup /
programmed (see Chapter 5 TABLE 5 - 3 about where fax’d reports will be sent) .
JW
REPORT
9
SELECT REPORT GROUP (MORE)
INVENTORY DELIVERY USAGE TEST
M1 M2 M3 M4
LEFT RIGHT
SELECT REPORT GROUP (MORE)
SENSOR ALARM SETUP REGULATORY
M1 M2 M3 M4
LEFT RIGHT
SELECT PRODUCT SELECT TANK
DETAIL SUMMARY DETAIL SUMMARY
M1 M2 M3 M4
LEFT RIGHT
MIDGRADE - INVENTORY DETAIL REPORT
PRINTER FAX
M1 M2 M3 M4
LEFT RIGHT