User Manual

Console – Basic Operation Page 1 - 3 1
Sentinel Mode Display
Under the word TANK, SENTINEL is alternately displayed with OKAY or ALARM when the
Sentinel mode is running. Sentinel-mode is programmed to run after business hours and
will monitor for product thefts and gross tank leaks.
Tank or Line Testing Display
Under the word TANK or LINE, TESTING is alternately displayed with OKAY or ALARM
when leak test(s) are running. Tests can either be started manually, or scheduled (setup)
to run at certain times of the month, week, or day. A tank leak test estimate report can be
printed by using the REPORT key. A leak test status can be displayed, and a leak test can
be (aborted), by using the TEST key.
Tank & Line Display Notes:
a.) The tank-status display and any tank-related menus or reports do not appear unless
the number of tanks are setup / programmed for 1 or more tanks. A Leak Detection
System (tanks set to Ø) can monitor leak detection sensors, but does not monitor in-
tank product levels.
b.) The line-status display, and any line-related menus or reports will not appear unless
INCON Line Leak Detectors are connected to the TS-LLDI interface terminals, and the
number of lines are setup (programmed) for 1 or more lines.
➁ Menu keys (M1 thru M4) ...see graphic above
Menu keys are used to: make menu selections (see the ALARM key) and to display
information (see above... press a Menu key to display current alarms). Menu keys can
control the cursor, or delete a character when a number or letter input is required from the
keypad { M4 can backspace / delete a input character ( xxx_ ï ), M1 moves the cursor
left and M2 moves the cursor right }.
SELECT LEAK TEST OPTION
STATUS START ABORT
See Tank and Line
Display Notes
a & b (below)
See Tank and Line
Display Notes
a & b (below)
SYSTEM TANK SENSOR LINE
OKAY SENTINEL OKAY TESTING
M1 M2 M3 M4
LEFT RIGHT
SYSTEM TANK SENSOR LINE
WARNING TESTING ALARM OKAY
M1 M2 M3 M4
LEFT RIGHT