Installation Guide User Manual
6
TS-5
The INCON model TS-5 is an economical system that allows you to operate as efciently as possible. The TS-5 has a
variety of abilities and communication options, which enhance site management by increasing efciency and by providing
you with the data that you need to make intelligent business choices. The TS-5:
• Comes with a Control Module, a Power Supply Module and a Probe Module that can be used, among other things, to:
○ Monitor and test up to 12 underground and/or aboveground storage tanks (USTs) providing: product volume,
temperature compensated volume, water levels and product temperature information
Speciality Application Consoles
TS-608
The INCON model TS-608 is an economical system geared towards the Chinese market that can do everything the TS-5
can, but supports up to 8 tanks compared to the TS-5’s 12. The TS-608 has all of the standard features of the TS-5 and:
• Comes with a Control Module, a Power Supply Module and a Probe Module that can be used, among other things, to:
○ Monitor and test up to 8 underground and/or aboveground storage tanks (USTs) providing: product volume,
temperature compensated volume, water levels and product temperature information
TS-EMS
INCON’s TS-EMS (Environmental Monitoring System) is designed for use in locations that do not require FMS
functionality, but where VRM (Vapor Recovery Monitoring) and/or SCM (Secondary Containment Monitoring) functions are
required. In addition to coming equipped with a Controller Module (CM) and a Power Supply Module (PS), the TS-EMS
also can be congured with expansion modules to run the applications and devices that you want in your system.
Note: The TS-EMS connects to an external ATG console so that it can obtain ullage information to perform its VRM and
SCM duties.
TS-EXPC
The TS-EXPC is a TS-5000 console that: comes with a PS, has space for eleven (11) additional modules, and connects
to your primary console via the bus extension port. The TS-EXPC lacks a CM and LCD, so that it can operate efciently
as a secondary unit to house any additional modules that your primary console was unable accommodate due to space
restrictions. For more information on the relationship between a primary and secondary console, please refer to the
Communication Ports chapter of this manual.
• No communication ports are available through the TS-EXPC
• Only one TS-EXPC or EXPC2 can operate in a TS-5 Series system
• A TS-EXPC can only communicate with a TS-550 or TS-5000, and cannot communicate with a TS-5/TS-608
TS-EXPC2
The TS-EXPC2 is a TS-550 console that: comes with a PS, has space for six (6) additional modules, and connects to
your primary console via the bus extension port. The TS-EXPC2 lacks a CM and LCD, so that it can operate efciently
as a secondary unit to house any additional modules that your primary console was unable accommodate due to space
restrictions. For more information on the relationship between a primary and secondary console, please refer to the
Communication Ports chapter of this manual.
• No communication ports are available through the TS-EXPC2
• Only one TS-EXPC or TS-EXPC2 can operate in a TS-5 Series system
• A TS-EXPC2 can only communicate with a TS-550 or TS-5000, and cannot communicate with a TS-5/TS-608