Installation Guide User guide

4
Introduction
This manual contains installation and site preparation instructions for INCON’s TS-5XXX series of consoles. Overall safety 
issues, troubleshooting information, warranty, service, and return policies, as dened in this manual, must be followed.
Please read this entire manual carefully. Failure to follow the instructions in this manual may result in faulty 
operation, equipment damage, injury or death. This equipment should only be serviced by an INCON-certied installer.
Certied Installer/Service Person: Only an INCON certied installer or service person is allowed to access both the 
user interface keypad and areas internal to the TS-5 Series console.
Station Owner/Operator: The station owner or operator of the TS-5 Series console is only allowed to access the user 
interface keypad. Access to areas internal to the console is strictly prohibited.
Abbreviations & Acronyms
10ARLY - 10 Amp Relay Module
2WSMS - 2-Wire Sensor Module (Intrinsically Safe)
3WSMS - 3-Wire Sensor Module (Intrinsically Safe)
420EXP - 4-20 mA EXP module
ACI - AC Input Module
420IB - 4-20mAAnalog Input Module (Intrinsically Safe)
AST - Aboveground Storage Tank
ATG - Automatic Tank Gauge
CARB - California Air Resources Board
CM - Controller Module
DIM - Dispenser Interface Module
FMS - Fuel Management Systems
IO - Input / Output module
IS - Intrinsically Safe
ISD - In-Station Diagnostic
LIM - LonWorks Interface Module
PC - Personal Computer
PRB - Probe Module (Intrinsically Safe)
PS - Power Supply Module
RLY - Relay Module
SCM - Secondary Containment Monitoring
TPI - Turbine Pump Interface
TS-5XXX - TS-5 Series Consoles (TS-5 (TS-608), TS-550 (TS-EMS), TS-5000 and TS-EXPC)
TS-EMS - TS-5 Series - Environmental Monitoring System
TS-EXPC - TS-5 Series - Expansion Console
UST - Underground Storage Tank
VRM - Vapor Recovery Monitoring
Related Documentation
The system operation and programming instructions, troubleshooting guide and console maintenance manual are 
provided for your use in separate documents. Detailed installation and testing instructions for each type of leak detection 
sensor are present in the relevant manual, and, likewise, the installation, testing, and programming of various upgrade kits 
and optional accessories are also contained in separate manuals, addenda or in one of this document’s appendixes.