Specification

Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com

TECHNICAL DATA

QTY.

DESCRIPTIONNO.

BRACKET ASSEMBLY

12 FLANGE ASSEMBLY

13 GASKET

14 PIN

15 PLATE

16 ROTATING FLANGE ARM

17 SCREW

MATERIALS: Two anchors (or one pair) are provided. Brace bar is 6063 T6 Aluminum; Arm is ABS; Mounting plate, screw and bracket

are stainless steel; Gasket is Neoprene. Anchor is corrosion resistant. Fastener length will accommodate wall thicknesses

from 1/2" to 2-1/2".

INSTALLATION: The anchor can be installed in hollow walls only. 1” hole in wall needed for installation. Anchor mounting plate rotates

360 degrees for any angle of install. Anchor is adaptable to most grab bars on the market. Can be installed in 1/2" drywall

(residential use only), 5/8" drywall, marble, and tile.

Always verify the surface condition before installing any products. The wall should not be deteriorating or wet.

SPECIFICATION: Grab bar anchor shall be model ____________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.

FB549 - GRAB BAR ANCHOR

FOR NON-STUD MOUNT

Grab Bar Accessories