Specification Sheet

Robe Hook
MATERIALS: Post - Zinc Die Cast
Wall Plate - Steel; 20 Gage; Zinc Plated
INSTALLATION: Mount wall plate with 2 #8 x 1-1/4” round head zinc plated steel screws and plastic anchors provided.
Slip robe hook post over the wall plate and tighten set screw until secure.
OPTIONAL
FASTENER
INFORMATION: Wood blocking is preferable behind all wall surfaces. If wood
blocking is not available, the following fasteners are suggested:
Tile/Masonry - Plastic or Lead Anchors;
Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted robe hook shall be model _____________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
2 5/16
1 7/8
1 9/16
140 Business Park Drive • Winston-Salem, NC 27107
800.542.3789 • T 336.769.4077 • F 336.769.1839
www.libertyhardware.com
TECHNICAL DATA
Effective September 2006
FUTURA
®