Specification Sheet

SPECIFICATION: Surface mounted shower rod shall be model (fill in model number and length)

by Liberty Hardware Manufacturing Corporation.

Tile/Masonry - Plastic or lead anchors

Plaster/Drywall - Toggle bolts

INSTALLATION: Install flanges and rod with 4- #8 x 1 1/4" flathead zinc plated steel screws provided. Tighten set screws on flanges

until rod is secure. Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the

following optional fasteners are suggested:

MATERIALS:

1" O.D. x .020 (25 gauge) seamless chrome plated brass. Flange material as listed under each model number.

13/16"

[21 mm]

1 3/4"

[44 mm]

[25 mm]

2 1/4"

[57 mm]

SHOWER ROD

105 & 110 Series

TECHNICAL DATA

140 Business Park Drive • Winston-Salem, NC 27107

800.542.3789 • T 336.769.4077 • F 336.769.1839

www.libertyhardware.com

Updated October 2006

5', 6'

PAGE 1
TECHNICAL DATA SHOWER ROD 105 & 110 Series 140 Business Park Drive • Winston-Salem, NC 27107 800.542.3789 • T 336.769.4077 • F 336.769.1839 www.libertyhardware.com 5', 6' 1" 13/16" [21 mm] 1 3/4" [44 mm] 2 1/4" [57 mm] 1" [25 mm] MATERIALS: 1" O.D. x .020 (25 gauge) seamless chrome plated brass. Flange material as listed under each model number. INSTALLATION: Install flanges and rod with 4- #8 x 1 1/4" flathead zinc plated steel screws provided. Tighten set screws on flanges until rod is secure.