Specification Sheet

CENTURY

Recessed Toilet Paper Holder

TECHNICAL DATA

140 Business Park Drive • Winston-Salem, NC 27107

800.542.3789 • T 336.769.4077 • F 336.769.1839

www.libertyhardware.com

Updated October 2006

SPECIFICATION:

INSTALLATION:

MATERIALS:

Recess paper holder shall be model (fill in model number)

by Liberty Hardware Manufacturing Corporation.

Cut out wall opening 5 1/4" x 5 1/4" x 2" depth. If wood blocking available, install recess shell into opening using

2- #8 x 1 1/4" flathead stainless steel screws provided. If wood blocking is not available, use optional 600R or

601R recess wall clamps.

Stainless steel recess shells are stamped from 22 gauge corrosion resistant type 304 stainless steel and are

polished or satined. Projecting posts are of 22 gauge type 304 polished or satin stainless steel. Roller material

as listed under each model number. All rollers are spring actuated.

1 3/4"

[44 mm]

1 7/8"

[48 mm]

[127 mm]

3 3/4"

[95 mm]

4 7/8"

[124 mm]

6 1/4"

[159 mm]

6 1/4"

[159 mm]

PAGE 1
TECHNICAL DATA CENTURY Recessed Toilet Paper Holder 140 Business Park Drive • Winston-Salem, NC 27107 800.542.3789 • T 336.769.4077 • F 336.769.1839 www.libertyhardware.com 5" [127 mm] 3 3/4" [95 mm] 1 7/8" [48 mm] 6 1/4" [159 mm] 6 1/4" [159 mm] 1 3/4" [44 mm] 4 7/8" [124 mm] MATERIALS: Stainless steel recess shells are stamped from 22 gauge corrosion resistant type 304 stainless steel and are polished or satined. Projecting posts are of 22 gauge type 304 polished or satin stainless steel.