Specification Sheet

(959 mm)
(908 mm)
(914 mm)
37 3/4"
35 3/4"
36"
(806 mm)
(756 mm)
(762 mm)
(654 mm)
(603 mm)
(610 mm)
(502 mm)
(451 mm)
(457 mm)
31 3/4"
29 3/4"
30"
25 3/4"
23 3/4"
24"
19 3/4"
DIM "B"
17 3/4"
DIM "A"
18"
LENGTH
3 3/8"
[86 mm]
1/2"
[13 mm]
2"
[51 mm]
2"
[51 mm]
"B"
"A"
Mount wall plates at 17 3/4" C-C for 18" bar, 23 3/4" C-C for 24" bar and 29 3/4" C-C for 30" bar, 35 3/4" C-C
for 36" bar, on wall surface in vertical position with 4- #8 x 1 1/4" roundhead zinc plated screws provided.
Slip posts and bar over wall plates and tighten set screws until secure.
(fill in model number)
Plaster/Drywall - Toggle bolts
Tile/Masonry - Plastic or lead anchors
Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following optional
fasteners are suggested:
INSTALLATION:
SPECIFICATION:
Surface mounted towel bar set shall be model
by Liberty Hardware Manufacturing Corporation.
MATERIALS:
Inner Wall Flange - 16 gauge type 304 stainless steel
Cover Wall Flange - 22 gauge type 304 stainless steel
Projecting Post - 22 gauge type 304 stainless steel
Bars - Bars are 3/4" square type 430 polished stainless steel, 3/4" square type 430 satin stainless steel (SF),
3/4" round type 304 polished stainless steel (R), or 3/4" round type 304 satin stainless steel (RSF). All bars
are .015 (28 gauge).
All components welded construction with concealed screw attachment on 16 gauge stainless steel wall plate.
CENTURY
Towel Bar
TECHNICAL DATA
140 Business Park Drive • Winston-Salem, NC 27107
800.542.3789 • T 336.769.4077 • F 336.769.1839
www.libertyhardware.com
Updated October 2006