Specification Sheet

CENTURY
Toilet Paper Holder
TECHNICAL DATA
140 Business Park Drive • Winston-Salem, NC 27107
800.542.3789 • T 336.769.4077 • F 336.769.1839
www.libertyhardware.com
Updated October 2006
Mount wall plates at 5 3/4" C-C on wall surface in vertical position with 4- #8 x 1 1/4" roundhead zinc plated steel
screws provided. Slip paper holder posts over wall plates and tighten set screws until secure. Wood blocking is
preferable behind all wall surfaces. If wood blocking is not available, the following optional fasteners are suggested:
Tile/Masonry - Plastic or lead anchors
Plaster/Drywall - Toggle bolts
SPECIFICATION:
INSTALLATION:
MATERIALS:
)rebmun ledom ni llif( ledom eb llahs redloh repap detnuom ecafruS
by Liberty Hardware Manufacturing Corporation.
Inner Wall Flange - 16 gauge type 304 stainless steel
Cover Wall Flange - 22 gauge type 304 stainless steel
Projecting Post - 22 gauge type 304 stainless steel
Roller material as listed under each model number. All rollers are spring actuated.
All components welded construction with concealed screw attachment on 16 gauge stainless steel wall plate.
7 3/4"
[197 mm]
3 3/8"
[86 mm]
5 3/4"
[146 mm]
1/2"
[13 mm]
2"
[51 mm]
2"
[51 mm]