Specification

ManualsBrandsFranklin Brass ManualsBath24 in. W Towel Shelf with Beveled Flanges and One Bar in Polished Chrome

TECHNICAL DATA

Towel Shelves

MATERIALS: Escutcheon - Stamping Brass

18", 24" Tube - Brass 3/4" O.D.,18 Gauge, Seamless Drawn Tubing

Wall Plate - Steel x 13 Gauge, Nickel Plated

INSTALLATION: Mount 2 wall flanges at 18" C-C for 18" towel shelf, 24" C-C for 24" towel shelf with 4

#10 x 1-1/2" round head zinc plated steel screws provided. Mount towel shelf and bar by

sliding open ends of tubing on to projecting fittings on wall flanges and tighten set

screws until secure.

OPTIONAL FASTENER INFORMATION:

Wood blocking is preferable behind all wall surfaces. If wood blocking is not available,

the following fasteners are suggested: Tile/Masonry - Plastic or Lead Anchors,

Plaster/Drywall - Toggle Bolts.

SPECIFICATION: Surface mounted towel shelf with 1 bar shall be model ____________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.

TOWEL SHELF WITH 1 BAR

2790

(666 mm)

(610 mm)

(514 mm)

(457 mm)

(610 mm)(457 mm)

26-7/32"

24"

20-7/32"

DIM "B"

18"DIM "A"

18"LENGTH

Towel Shelves

MATERIALS: Wall Flange - 17 Gauge Stamped Brass

Shelf Tubing - .035 (20 Gauge) 3/4" O.D. Brass Tubing

Towel Bar Tubing - .035 (20 Gauge) 3/4" O.D. Brass Tubing

Crossbars - .025 (23 Gauge) 3/8" O.D. Brass Tubing

INSTALLATION: Mount wall flanges (set screw holes facing down) through holes in projecting fittings with 4 - #10 x 1-1/2" oval head nickel plated

steel screws provided or 4-3/16" x 3" zinc plated steel toggle bolts provided. Wall flange screw holes are vertically 4-7/8" center

to center and horizontally 24" center to center. Mount top shelf first, then middle bar, and finally bottom bar with 6 - 1/4-20 x 5/8"

slotted nickel plated steel set screws.

OPTIONAL FASTENER INFORMATION:

Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following fasteners are suggested:

Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.

SPECIFICATION: Surface mounted towel shelf with 2 bars shall be model ____________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.

TOWEL SHELF WITH 2 BARS

2789

2-7/32"

56.4 mm

"A"

"B"

8-15/32"

215.1 mm

9-15/16"

252.4 mm

4-7/8"

123.8 mm

2-1/8"

54 mm

9-7/8"

251 mm

5-7/8"

149 mm

102 mm

1-3/4"

44 mm

1-3/4"

44 mm

8-1/2"

216 mm

24"

610 mm

26-1/8"

664 mm

Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com