Specification Sheet

TOWEL SHELF WITH 1 BAR
2780 & 2781 Series
TECHNICAL DATA
140 Business Park Drive • Winston-Salem, NC 27107
800.542.3789 • T 336.769.4077 • F 336.769.1839
www.libertyhardware.com
Updated October 2006
(664 mm)
26 1/8"
(610 mm)
24"
(610 mm)
24"
(511 mm)
20 1/8"
(457 mm)
18"
(457 mm)
18"
DIM "B"
DIM "A"
LENGTH
Install top shelf and bottom towel bar on wall flanges with 4-1 1/4" machine screws through lock washers and
support plates. Mount assembled towel shelf with 1 bar with 4- #10 x 1 1/2" ovalhead nickel plated steel screws
provided or 4- 3/16 x 3" zinc plated steel toggle bolts provided.
Tile/Masonry - Plastic or lead anchors
Plaster/Drywall - Toggle bolts
Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following optional
fasteners are suggested:
SPECIFICATION:
INSTALLATION:
MATERIALS:
Surface mounted towel shelf with 1 bar shall be model (fill in model number)
by Liberty Hardware Manufacturing Corporation.
Wall Flange- 18 gauge stamped type 304 stainless steel.
Shelf Tubing - .028 (23 gauge) 3/4" O.D. type 304 stainless steel tubing.
Towel Bar Tubing - .028 (23 gauge) 3/4" O.D. type 304 stainless steel tubing
Crossbars - .025 (23 gauge) 3/8" O.D. type 304 stainless steel tubing.
Shelf and extension bar tubing is attached to wall flange with knurled brass bushings, brass washers and
#1/4 - 20 x 1/2" zinc plated steel machine screws.
4 1/8"
[105 mm]
5 7/8"
[149 mm]
9 7/8"
[251 mm]
2 1/8"
[554 mm]
6 3/8"
[162 mm]
8 1/2"
[216 mm]
"A"
"B"