Manual

Switching from Automatic to Manual Powder Trickling

The Jiffy

™

Powder Trickler may be switched to Manual mode by gently

rolling the o-ring out of the groove toward the end of the dispensing tube.

Next, pull back on the gray knob to disengage the trickler motor. The

gray knob can now be rotated manually to trickle powder. To return

trickler to Automatic mode, simply push the gray knob back in, matching

the gears, and roll the o-ring back into the groove on the dispensing tube.

Warning: Do not operate trickler in Automatic mode without o-ring

in the dispensing tube groove! This may cause premature wear/fail-

ure of your trickler.

Tips

1. Ball, flake, and extruded powders trickle differently. You will need to

experiment with various powders to learn the best method for trick-

ling the last few grains for each load.

2. When you empty the electric powder trickler, make sure you lightly

tap the powder tube several times on a hard surface to remove any

trace of powder left in the tube.

3. Do not store powder in your Jiffy

™

Powder Trickler! Powder left out

in the open will be contaminated by moisture in the air over time.

Powder must be stored in a properly labeled powder container.

Limited Warranty

Every Frankford Arsenal product is warrantied to be free of defects in materials and

workmanship for a period of one (1) year from the date of original purchase. Frankford

Arsenal will, at its option, repair or replace without charge, except for transportation costs,

parts that fail under normal use and service when operated and maintained in accordance

with our instructions. This warranty does not apply to normal wear or to items whose life is

dependent upon their use and care. This warranty is in lieu of all other warranties, expressed

or implied and releases Frankford Arsenal, its affiliates, and its vendors from all other oblig-

ations and liabilities.

A Battenfeld Product • 5885 W. Van Horn Tavern Rd • Columbia • MO • 65203