INSTALLATION GUIDE Soap Dispenser - SD2400, SD2460, SD2480 KITCHEN SYSTEMS
INSTALLATION INSTRUCTIONS 1 Remove all contents from the package and check for completeness. NOTE: Call immediately if you see inconsistencies. (1-800-626-5771) or visit www.frankeksd.com info.fks@franke.
Installation 2 3 4 5 Ensure proper hole is in place for the Dispenser. This Dispenser is designed to mount into a 1-3/8” (35mm) mounting hole. Product will arrive with dispensing head already mounted in base flange. Remove the dispensing head assembly from the base flange assembly. Insert the fill tube into the pump at the bottom of the dispensing head assembly and set this aside. Dispensing head Pump Fill tube Unscrew the mounting nut from the base flange assembly.
Installation 7 Insert the dispensing head assembly with assembled fill tube into the base flange and bottle and point the discharge of the dispensing head towards the front of the sink, or to the desired location. 8 Pump dispensing head several times until soap/lotion is discharged through the head.
Usage 1 With the bottle full, press the Dispensing Head to discharge soap/ lotion. Remove pressure from the Dispensing Head, and it will return to the original position, and it can be pumped again. 2 Continue pumping until desired amount of soap/lotion is discharged.
MAINTENANCE 1 With normal use, maintenance should not be necessary. Should there be an extended period where the dispenser is not used, it is possible the soap/lotion could harden and prevent proper discharge. In this event, submerge the entire Dispensing Head with Pump into hot water for several minutes. Next pump hot water through the assembly. Repeat as necessary to remove the obstruction. 2 To clean the dispenser, use a soft cloth or sponge with soap and water only.
LIMITED LIFETIME WARRANTY Congratulations on the purchase of this Franke product! Franke is one of the world’s largest manufacturers of kitchen systems. Our products are manufactured using the highest degree of technology, quality, and design. As a result, we are proud to offer the following warranty. Franke warrants the quality of its soap/lotion dispensers to be free from manufacturing defects for a period of five years from the date of purchase.
Franke Consumer Products Inc., Kitchen Systems Division 3050 Campus Drive, Suite 500, Hatfield, PA 19440 Phone: +1-215-822-6590 or 1-800-626-5771 Fax: +1-215-822-5873 www.frankeksd.
