Installation guide

Disconnecting the tank
1 2
3 4
1 Switch off
Set the power switch off and remove
the plug from the outlet.
2 Draining
Open the Quooker tap and leave the
water running until it is cold (10-15°C).
ATTENTION: initially the water will be
extremely hot.
3 Isolating
Close the main water valve or the stop
valve of the inlet combination. Check
that the Quooker is depressurised by
opening the Quooker tap again.
If it is depressurised no water will flow
out of it.
4 Disconnecting
Unscrew the hoses and pull the LED
cable from the top cover. Drain the
unit into the sink.
F