Technical data

Warning
These hints have been prepared for your guidance, you must
exercise due care at all times. We do not accept responsibility
for any problems that may occur through incorrect installation.
How to care for your kitchen sink mixer
To maintain the appearance of this fitting, ensure it is cleaned
only using a clean, soft damp cloth. A solution of warm water
and mild liquid detergent may be used where necessary, and
then the fitting rinsed thoroughly. Abrasive cleaners or acidic
cleaners MUST NOT BE USED under any circumstances.
Avoid contact with all solvents.
Technical Data
Minimum water pressure: 7.25 PSI (0.5 bar)
Maximum water pressure: 75 PSI (5 bar)
Maximum hot-water temperature: 70°C
Recommended hot water temperature: 65°C
Note: If these temperatures or water pressures are
exceeded damage to the tap can result.
A pressure reducing valve may be required to be fitted in
high water pressure situations.
NB If for any reason the spout is removed from the tap, care
must be taken when reinserting the spout into the body to
ensure that the Grub Screw is located in the split of the
white PTFE ring.
PARTS LIST AS FOLLOWS:
133.0277.065 SPOUT CHROME 3842R CH
133.0277.066 SPOUT SILKSTEEL 3842R SS
133.0201.896 O-RING KIT 3550R
133.0277.068 PULL-OUT NOZZLE CHROME 3751R CH
133.0277.069 PULL-OUT NOZZLE SILKSTEEL 3751R SS
133.0277.070 ANTISPLASH 3750R
133.0277.071 KEY FOR ANTISPLASH 3776R
133.0277.072 HOT HANDLE CHROME 3843R-H CH
133.0277.073 COLD HANDLE CHROME 3843R-C CH
133.0277.074 HOT HANDLE SILKSTEEL 3843R-H SS
133.0277.075 COLD HANDLE SILKSTEEL 3843R-C SS
133.0153.218 INSERT + SCREW 3530R
133.0251.385 BASE PLINTH CHROME 3733R CH
133.0251.386 BASE PLINTH SILKSTEEL 3733R SS
133.0150.220 HOT VALVE 3308R-H
133.0150.219 COLD VALVE 3308R-C
133.0251.361 FLEXI TAILS 3728R
133.0150.221 FIXING KIT 3311R