Technical data

Warning
These hints have been prepared for your guidance, you must
exercise due care at all times. We do not accept responsibility
for any problems that may occur through incorrect installation.
How to care for your kitchen sink mixer
To maintain the appearance of this fitting, ensure it is cleaned
only using a clean, soft damp cloth. A solution of warm water
and mild liquid detergent may be used where necessary, and
then the fitting rinsed thoroughly. Abrasive cleaners or acidic
cleaners MUST NOT BE USED under any circumstances.
Avoid contact with all solvents.
Technical Data
Minimum water pressure: 7.25 PSI (0.5 bar)
Maximum water pressure: 75 PSI (5 bar)
Maximum hot-water temperature: 70°C
Recommended hot water temperature: 65°C
Note: If these temperatures or water pressures are
exceeded damage to the tap can result.
A pressure reducing valve may be required to be fitted in
high water pressure situations.
NB If for any reason the spout is removed from the tap,
care must be taken when reinserting the spout into the body
to ensure that the Grub Screw is located in the split of the
white PTFE ring.
PARTS LIST AS FOLLOWS:
133.0281.825 SPOUT CHROME 3773R CH
133.0281.826 SPOUT SILKSTEEL 3773R SS
133.0281.827 O-RING KIT 3782R
133.0281.828 PULL-OUT NOZZLE CHROME 3745R CH
133.0281.829 PULL-OUT NOZZLE SILKSTEEL 3745R SS
133.0068.791 ANTISPLASH CHROME 1485R CH
133.0068.792 ANTISPLASH SILKSTEEL 1485R SS
133.0281.830 FLEXIBLE HOSE (ONLY) 3743R
133.0255.907 COLLAR CHROME 3789R CH
133.0255.908 COLLAR SILKSTEEL 3789R SS
133.0255.909 HANDLE CHROME 3769R CH
133.0255.910 HANDLE SILKSTEEL 3769R SS
133.0069.366 CARTRIDGE 1484R
133.0255.911 PLINTH CHROME 3760R CH
133.0255.912 PLINTH SILKSTEEL 3760R SS
133.0 069.316 WEIGHT 1289R
133.0251.361 FLEXI TAILS 3728R
133.0068.793 FIXING KIT 1320R