Installation Sheet

7
1
Usage
Replacing Catridge
Push the handle(s) back to turn on the
water supply and foreward to turn the
water off the water supply.
Note: The spout has a 360° swivel
capability
2
WARNING! Do not operate both handles at the same time, as this can build
up pressure in the heating tank causing the bladder to expand and eventually
burst. Such damage is not covered by the warranty.
3
Seasonal Shutdown:
If you plan to be away from home for extended periods of time, refer to the
filtration system instructions and heating tank instructions (if applicable) under
the Winterizing or Seasonal Shutdown sections to prevent system failures.
HOT
COLD
ON
OFF
1.) Unthread lever
cap & remove cap &
O-ring.
2.) Remove bonnet
cover and cap by
carefully sliding over
lever stem.
Do not damage
finish.
3.) Unthread bonnet
and remove.
4.) Remove handle
by unthreading set
screw. Replace
cartridge making
sure to align pins
with grooves in body.
Reassemble handle
in reverse.