Installation Sheet

Installation
2
For best result, Franke recommends this faucet be installed by a licensed, professional
plumber. The installer should familiarize themselves with how this dispensing faucet will
be installed and function as part of a point-of-use hot water, a filtration only drinking water,
or a combination hot and filtered point-of-use water dispensing arrangement BEFORE the
products are installed. Make certain to observe all local plumbing and building codes during
installation of this unit.
First identify which dispenser and configuration you are using
Hot Water Installation Options:
The LB_200C Series dispensers offer hot and filtered water separately. These dispensers
must be used in conjunction with both a Franke heating tank unit and a Franke filtration
system. They utilize 4 tubes to connect to the system.
• 2 blue poly-tubes for the cold water supply into the dispensing faucet, which comes
from the filtration system.
• 1 red poly-tube to carry the filtered water from the dispensing faucet to the heating
tank unit.
• 1 opaque high temperature silicone tube to carry the heated water from the heating
tank back to the dispensing faucet.
The LB_100C Series dispensers offer hot water only. These dispensers are required to be
used in conjunction with a Franke heating tank unit. Use of a Franke filtration system in
addition to the heating tank is optional, but strongly recommended in order to prolong the
life and improve the performance of the heating tank, as well as providing much higher
quality water as compared to un-filtered water entering the tank. These models utilize 3
tubes to connect to the system.
• 1 black poly-tube for the cold water supply to the dispensing faucet, which
must come from the home water supply or from the filtration system (if utilized).
• 1 red poly-tube to carry the filtered water from the dispensing faucet to the heating
tank unit.
• 1 opaque high temperature silicone tube to carry the heated water from the heating
tank back to the faucet.
Cold Water Installation Options:
The DW_ _ 00C Series dispensers provide filtered drinking water as well as the option of
chilled drinking water. These dispensered are required to be used in conjunction with a
Franke filtration system. For chilled drinking water, a Franke chiller tank unit is required.
These models use only one black poly-tube to connect the system.
IMPORTANT: Franke strongly recommends using only genuine Franke components in
tandem with all Franke dispensing faucets. The function of the dispensing faucets can-
not be guaranteed if using filtration products, heating tanks or other accessories other
than genuine Franke components. These dispensing faucets are NOT compatible with
a REVERSE OSMOSIS (RO) FILTRATION SYSTEM and using them with a RO system WILL
VOID THE PRODUCT WARRANTY.
3