INSTALLATION GUIDE Kitchen - FF2400, FF2460, FF2480 Bar/Prep - FFBP2400, FFBP2460, FFBP2480 KITCHEN SYSTEMS
TECHNICAL DATA Standard Water Flow - 1.2 GPM at 45 PSI Maximum Water Flow - 2.2 GPM at 60 PSI Recommended Pressure Range - 15 to 75 PSI has certified that this faucet complies with NSF61, AB1953 and ASME 112.18.1-2011/CSA B125.1-2011 requirements INSTALLATION INSTRUCTIONS 1 Remove all contents from the package and check for completeness. NOTE: Call us immediately if you see inconsistencies. (1-800-626-5771) or visit www.frankeksd.com info.fks@franke.
Installation 2 3 4 Flush the water supply to be sure it is free of debris and then shut off the water supply. Ensure O-ring is in place as shown to create proper seal. If O-ring is missing, the faucet will leak. Remove the check valve from the riser swivel nut so the nut can be moved out of the way. Install hose riser into mixer body. Use wrench to tighten. Reinstall the check valve and sealing washer onto the swivel nut, hand tight.
Installation 6 Plumber / Installer must test and confirm that all hoses, hose riser and check valve connection seals are water tight. 7 Attach the weights (2) to the hand shower hose at a suggested distance of 22" [560 mm] from the hose riser connection. The weights must be attached as close together as possible. Plumber / Installer must test and verify the correct distance. Care must be taken in positioning of the weights so the hand shower hose does not kink.
1 Usage The mixer can be installed with the handle positioned on the right or the left thanks to 360 degree spout rotation. COLD back HOT front 2 3 ON If the handle is installed on the right side hot water is obtained by moving the lever forward and cold water by moving it backward and water flow is turned on by moving handle to right.
1 Replacement Parts 1 - F2401CH 1 - F2401OWB 1 - F2401SN 2 - F2402 3 - F2403CH 3 - F2403OWB 3 - F2403SN 4 - F2404 7 - 2407CH 7 - 2407OWB 7 - 2407SN MAINTENANCE Lever Handle - chrome Lever Handle - old world bronze Lever Handle - satin nickel Cartridge Valve Kit - chrome Valve Kit - old world bronze Valve Kit - satin nickel Fastening set Hand shower - chrome (kitchen) Hand shower - old world bronze (kitchen) Hand shower - satin nickel (kitchen) 7 - 2411CH Hand shower - chrome (bar/prep) 7 - 2411OWB Hand
3 Cartridge Replacement Make sure water supply is turned off before maintenance. Unscrew set screw (1) to remove lever handle. Unscrew the screw (2) to remove handle extension (3). Lift off the dome (4) and the friction washer (5). Using a wrench unscrew the cartridge nut (6) and remove. Remove the large O-ring (7) from the nut (6) and replace with new O-ring. Remove the damaged cartridge (8) from the mixer body and discard cartridge.
LIMITED LIFETIME WARRANTY Franke Consumer Products, Inc., Kitchen Systems Division extends the following warranty to the original purchaser of its faucets effective January 1, 2003. All faucets installed in a private residence will carry a limited lifetime warranty on all mechanical parts to be free of manufacturing defects in material and workmanship under normal usage.
