Installation Guide

Countertop
Trace completely around
edge of sink. Hold pencil vertical.
2a
Countertop
Topmount template
Trace outline
of template
3b
Countertop
Cut Line
Traced outline of sink
4a
Using a 2" Hole Saw, drill a
hole on the inside edge of
the cut line.
Countertop
Cut Line
Traced outline of template
Using a 2" Hole Saw, drill a
hole on the inside edge of
the cut line.
4b
Countertop
Using a Jigsaw, cut along the
inside edge of the cut line.
Cut Line
3/8” Space
Traced outline of sink
5a
Countertop
Using a Jigsaw, cut along the
inside edge of the cut line.
Cut Line
Traced outline of template
5b
NEW COUNTERTOP FOR TOPMOUNT INSTALLATION
If you are installing a new countertop along
with your new sink, it is easier to cut out and
adjust  tting prior to securing countertop to
the base cabinets. We recommend comparing
the template provided to the sink before
cutting the countertop. (For natural stone or
a solid surface material like granite, marble,
Corian® or Quartz; sink opening should be cut
by a professional.)
Before marking or cutting countertop, use
the sink and template to determine sink
position. A cutting mistake will be costly.
Corian® is a registered trademark of DuPont™
Cut Line
Draw second line 3/8"
inside sink outline.
Cut Line
3/8"
3/8" Space
1-1/2" Radius at Corners
1-1/2" Radius
3a
Traced outline
of sink
Con rm your cut line with the topmount cut template
provided with your sink.
2b
Place template on
countertop & conrm
where to cut hole.
Countertop
Cabinet
Template
SINK AS TEMPLATE
1a
Place sink on
countertop to conrm
where to cut hole.
Countertop
Cabinet
Sink
USING TEMPLATE
Cut out topmount template
1b
NOTE: The illustrations are a
representation of a sink and may
di er from the style of your sink.
The instructions still apply to
your installation.
Granite_Install_Broch_EN_prod.indd 3Granite_Install_Broch_EN_prod.indd 3 2/25/11 4:43 PM2/25/11 4:43 PM