Installation Instructions
TRANSITIONINSTALLATION
WATERPROOF
END CAP
V-EC-14
Used to fill the gap between the floor
and carpet, hearths or against sliding
doors.
Used with floors ranging from
2-6mm height.
Surface: Wear resistant
Core Material: Rigid PVC
Dimension: 1.5”w x 0.25”h
0.529˝
Measure and trim to fit.
Install the flooring leaving a 1-1/4” gap between
the two floor surfaces for the end cap installation.
Center the track between the flooring leaving a
1/4” spacing between the track and floor planks.
Screw track to subfloor using included screws
(or glue down with construction adhesive).
Suboor Suboor
Floor
Starting at one end, press the molding into the
track inching along the length of the molding.
It will NOT snap in all at once. You may also use a rubber mallet.
Suboor
Floor
1
1
/4
˝
Suboor Suboor
Floor
1
/
4
˝
3
/
8
˝