Technical Specifications

ManualsBrandsFramerica ManualsFlooring & Rugs94" Bamboo Laminate Flooring End Cap

page 1

2 Todd Court • Yaphank, NY 11980

800.372.6422 • 631.567.8882 • www.framerica.com

MATERIAL SAFETY DATA SHEET

Product/Trade Name

Framerica® BonanzaWood®

Anticipated Use

Moulding

Formaldehyde

CAS No. 50-00-0

Minimal emission of gaseous formaldehyde. Emissions decrease as

panels age. Minimal health hazard risk with anticipated use under

normal conditions. Refer to section 6. Health Hazard Information

Wood Dust

Synonyms - Sawdust

Fine wood particles generated by mechanical cutting or abrasive

processes. Wood dust is a common by-product when using/pro-

cessing product. In some conditions, wood dust may be a health

hazard. Refer to section 6. Health Hazard Information.

Physical State

Solid

Appearance and Odor

Straw yellow to light brown

Boiling & Melting Points

Not Applicable

Specic Gravity (Water=1)

Solubility In Water

Negligible

Not Applicable

% Volatile

Not Applicable

Vapor Density

Not Applicable

Vapor Pressure

Not Applicable

Evaporation Rate

Not Applicable

Flash Point

Not Applicable

Auto-Ignition Temperature

Variable: typically 200-260 §C (400-500 §F)

Explosive Limits In Air

Lower Explosive Limit: Wood dust: 40 grams/m

Upper Explosive Limit: Wood dust: Variable

Fire/Explosion Hazard

Dust clouds and build-up of dust present re/explosion hazard in

contact with ignition sources (electrical spark, hot metal sparks, open

ame)

Extinguishing Media and Fire Fighting

Water preferred - Apply by hose stream, ne spray or foam. Dry

Chemical or Carbon Dioxide may be used for small res only - Fol-

low with water.

Use of self contained breathing apparatus is recommended when

ghting re.

Fire Prevention

Remove accumulation of wood dust. Wet down dust to reduce risk

of ignition and dispersion of wood dust in air.

Section 1. Material Identication and Product Use

Section 2. Hazardous Ingredients

Section 3. Physical Data

Section 4. Fire and Explosion Data

Summary of content (3 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Section 1. Material Identification and Product Use Product/Trade Name Framerica® BonanzaWood® Anticipated Use Moulding Section 2. Hazardous Ingredients Formaldehyde CAS No. 50-00-0 Minimal emission of gaseous formaldehyde. Emissions decrease as panels age. Minimal health hazard risk with anticipated use under normal conditions. Refer to section 6.
PAGE 2
Section 5. Reactivity Data Stability Stable under normal conditions. Incompatibility Avoid contact with oxidizing agents and drying oils. Avoid open flame. Product may ignite at temperatures in excess of 200 §C (400 §F) Decomposition Products Toxic fumes and gases including, Carbon monoxide, aldehydes, formaldehyde and organic acids are possible by-products of thermal and/or thermal oxidative decomposition. Hazardous Polymerization Not Applicable Section 6A.
PAGE 3
Section 7. Preventative Measures Provide adequate ventilation General ventilation is usually adequate. Local exhaust may be preferred if cutting/machining processed cause localized heating of material. Reduce dust concentration at point of generation Local exhaust and general ventilation is recommended for any processes which produce wood dust at concentrations that approach sage exposure levels. Reduce accumulation of dust in work areas. Regular removal of wood dust from work areas if recommended.