Instructions / Assembly

FENCE INSTALLATION GUIDE
For a 6ft fence installation with a frost line
deeper than 2ft, the post can be extended
deeper into the ground using a Fixing Post
Support (A1) and a cut piece of aluminum
post.
The Fixing Post Support extends up into the
post 2ft. The Aluminum Post Cut should be no
longer than 18”. This will allow for a minimum
remainder of 6” of Fixing Post Support to be
inserted into the 8ft Aluminum Post.
The Aluminum Post can be cut using a 60-
tooth Carbide Circular Saw Blade.
Once the Fixing Post Support and Aluminum
Post Cut are inserted in the post hole,
continue with standard installation.
(C) Extending Post for Deeper Frost Lines
Have an Issue or Question? Contact us first at:
[e-mail] or [phone]
Fixing Post
Support
Aluminum
Post Cut