Instructions / Assembly

Introductions
Read ALL instructions before starting the installation process
It is the responsibility of the fencing installer to abide by all safety and code requirements,
and to obtain all applicable building permits. The fencing installer should establish and
execute appropriate installation methods for each installation scenario. Frame it All Fencing
and its distributors shall not be held liable for improper or unsafe installation.
Contact your local Building Code Department for applicable permits and laws regarding your
fence installation. If necessary, also communicate with your Home Owners Association (HOA)
for guidelines and regulations on fencing installations in your community.
CALL 811 BEFORE YOU DIG TO HAVE YOUR UNDERGROUND UTILITIES MARKED
Take care to wear necessary Personal Protective Equipment (PPE) during fence
installation.
Handle Frame it All Fence panels with care as dropping, dragging, or leaning can
result in damage to the boards.
Frame it All Fencing is designed for vertical use. It is NOT designed to support
constant load or to be used as an anchor point.
Storage:
- Keep all fence boards in their delivery crate until ready to install.
- Do not lean fence boards against a wall or onto a rough surface as this can result
in scratches to the boards.
Have an Issue or Question? Contact us first at:
[e-mail] or [phone]