Instructions / Assembly

Before digging any post holes, make sure you are abiding local code requirements
for exact post hole width and depth guidelines. The diameter of the hole should be a
minimum of 12 Inches and the depth should be a minimum of 20 Inches.
Dig the post hole using an Augur Drill or other Post Hole digger.
While digging the post holes, be sure to keep your Post Hole digging tool straight
and vertical.
Note: Do not pour concrete at this step.
Reminder: Call 811 before digging
post holes to avoid damaging
underground utilities.
(B) INSTALLATION IN-GROUND CONCRETE FOOTING
Have an Issue or Question? Contact us first at:
[e-mail] or [phone]
FENCE INSTALLATION GUIDE