Instructions / Assembly

FENCE INSTALLATION GUIDE
FOR IN-GROUND CONCRETE FOOTING INSTALLATION, WE RECOMMEND
TWO (2) PEOPLE
(B) INSTALLATION IN-GROUND CONCRETE FOOTING
Have an Issue or Question? Contact us first at:
[e-mail] or [phone]
Post installation in a concrete footing must be done with care.
We recommend using a fast-setting concrete.
Begin by identifying your property limits and establishing the perimeter of your
fence. Determine the length of each fence run and mark the distance between each
post. Make sure to create an 1800mm (5.9 ft) spacing (+/- 5mm or 0.2 inches)
between each post on center.
Mark the perimeter of your fence by placing stakes around your perimeter and
tightening a line around them. Then, beginning at your first post hole, use a tape
measure to mark each post hole location.
Note: For non-90 ° angle corners, use 2 posts in the post hole and size hole
appropriately.