Instructions / Assembly

Have an Issue or Question? Contact us first at:
[e-mail] or [phone]
FENCE INSTALLATION GUIDE
The square galvanized steel inner post will measure 102” and the composite post
sleeve will measure 72” by default. An 80-tooth Cermet Circular Saw Blade can be used
to cut the steel post down and a 60-tooth Carbide Circular Saw Blade can be used to
cut all composite components.
We strongly recommend installing Frame it All 360 Cap Composite Pickets with 4 rails
and posts placed 6ft on center. Our composite pickets weigh more than standard wood
pickets making 3 rail/ 8ft post placement on center not advised.
Minimum picket spacing of 4mm to account for the expansion/contraction of the
composite material.