Instructions / Assembly

Step 1: Install the L-brackets onto
wooden rails
Install the L-brackets (Part C1) onto the
bottom of each end of the wooden rail with
the M4 x 16mm screws (Part F1). For a 6ft x 6ft
fence panel, we recommend installing 4 rails
spaced no further than 24” apart.
Position the rails between the 2 posts and use
the holes of the L-bracket to mark holes on the
post. Then, using a 3/16” drill bit, pre-drill
through both the composite sleeve and steel
inner post.
Have an Issue or Question? Contact us first at:
[e-mail] or [phone]
FENCE INSTALLATION GUIDE
(A) Individual Picket Installation with Frame it All Post Assembly