Instructions / Assembly

Step 6: Securing Posts with Concrete
Once the post is positioned in the hole, pour
concrete into the hole. Dome the concrete
around the post to prevent water pooling. The
composite post sleeve should be above the
ground level and not touching the concrete.
Take this time before the concrete completely
hardens to make any last adjustments to
ensure the post is plumb.
Tip: Wait until the concrete has completely
cured before installing the rails and
pickets/panels.
Have an Issue or Question? Contact us first at:
Support@Frameitall.com or (800) 914-9835
FENCE INSTALLATION GUIDE