Instructions / Assembly

Customer Service: 1800-914-9835 | [e-mail]
ASSEMBLY INSTRUCTIONS – For Product with Second Level only
STEP 3: For the second level, use 4 (A) timbers and the stacking stakes. Insert one
stake through the brackets into the hole on top of the stake beneath it to lock the
second level in place.
STEP 4: Add the caps to each of the top corner joints and plugs to cover the holes on
both side of timbers.
X 4
Use plugs (included)
to cover the holes on
both side of timbers
Use plugs to cover
the holes – two
plugs are required
per bracket (1 on
each side)
Use a Finishing
Cap to complete
the top level.
Use an Anchor
or Stacking Joint
for ground level
frames or borders.
Use only Stacking
Joints when
creating additional
levels.
When creating a
multi-level frame
use a Stacking
Joint.
Stacking Joints fitinto
the tops of Anchor
Joints and other
Stacking
Joints
How the Joints Work