Instructions / Assembly

Customer Service: 1800-914-9835 | [e-mail]
ASSEMBLY INSTRUCTIONS
STEP 1:
For one level, assemble 4 x Doubled-Bracket Timbers (A)
For two levels, assemble 8 x Doubled-Bracket Timbers (A)
Attach one single stacking bracket to each end of timbers (one facing up, one facing
down – shown above)
STEP 2: Layout the base level of your raised garden in a straight square shape, using 4
(A) timbers. Insert Stake through the hole of the bracket and into each of the corners
to lock all sides in place.
X 4
X 8
Use plugs (included)
to cover the holes on
both side of timbers
X 4
STEP 2a: For one level, add caps to
each of the top corner joints to finish
off the raised garden and plugs to cover
the holes on both side of timbers.
HAPPY GARDENING!
Note:
If you plan to assemble raised bed on a hard surface, use
hacksaw to remove the spike of each stake. Use these cut
down stakes for the base level only of your raised garden.
Trim stake spike with
hacksawfor use indoor
or on hard surfaces