Instructions / Assembly

300001058/300001080/300001084/300001061

300001424/300001425/300001426/300001427

300001514

RAISED GARDEN BED

4’ x 4’

1 LEVEL KIT CONTAINS:

Customer Service: 1800-914-9835 | support@frameitall.com

Composite

Timbers x 4

Stacking

Brackets x 8

Tools needed: Hammer (to tap stake in place), Hackshaw (optional)

Stake x 4

Plugs x 16

Caps x 4

2 LEVELS KIT CONTAINS:

Composite

Timbers x 8

Stacking

Brackets x 16

Stake x 8

Plugs x 32

Caps x 4

1 LEVEL

2 LEVELS

Layout your timbers along

the borderline and

connect each timber

together by inserting the

top of the stake through

the bracket loops with the

stake pointing to the sky.

This enables you to freely

position your border to

get your desired location.

PAGE 1
300001058/300001080/300001084/300001061 300001424/300001425/300001426/300001427 300001514 RAISED GARDEN BED 4’ x 4’ 1 LEVEL 2 LEVELS 1 LEVEL KIT CONTAINS: Plugs x 16 Composite Timbers x 4 Stacking Brackets x 8 Stake x 4 Caps x 4 2 LEVELS KIT CONTAINS: Plugs x 32 Composite Timbers x 8 Stacking Brackets x 16 Stake x 8 Caps x 4 Layout your timbers along the borderline and connect each timber together by inserting the top of the stake through the bracket loops with the stake pointing to the sky.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP 1: For one level, assemble 4 x Doubled-Bracket Timbers (A) X4 For two levels, assemble 8 x Doubled-Bracket Timbers (A) X8 Attach one single stacking bracket to each end of timbers (one facing up, one facing down – shown above) STEP 2: Layout the base level of your raised garden in a straight square shape, using 4 (A) timbers. Insert Stake through the hole of the bracket and into each of the corners to lock all sides in place.
PAGE 3
ASSEMBLY INSTRUCTIONS – For Product with Second Level only STEP 3: For the second level, use 4 (A) timbers and the stacking stakes. Insert one stake through the brackets into the hole on top of the stake beneath it to lock the second level in place. X4 STEP 4: Add the caps to each of the top corner joints and plugs to cover the holes on both side of timbers. How the Joints Work Use a Finishing Cap to complete the top level. Use an Anchor or Stacking Joint for ground level frames or borders.