Instructions / Assembly

Introducing the ‘Frame-It-All’ Hexagon Sandbox
For general assembly you can find the instructions in the 2 Pack of Frame-it-all joints.
ECO-friendly
The framework utilizes our Composite Plastic Timbers. Manufactured from 40% wood fiber and 60% recycled polyethylene,
the Eco-friendly durable composite wood grain plastic timbers never rot, warp or splinter. The cut to size timbers connect to
brackets with our patented Stacking Joints stakes.
Dimensions
Your Hexagon Sandbox fits in a 7’ X 8’ area.
Installation Notes:
Before starting to assemble the Hexagon Sandbox, refer to the parts diagram to understand how to screw the brackets onto the
timbers. Remove the Stacking joints from the plastic bags and lay out the parts. Each of the joints comprises a stake and two
brackets plus screws needed.
Tools Needed:
• Phillips head screwdriver
(electrical or battery operated preferred)
• Hammer
With a screwdriver, (a power driver would be
helpful) attach one bracket to each end of each of
the Composite Timbers as shown at right.
Screw bracket onto
composite timber
Two screws are
required per bracket
(1 on each side).
Use a Finishing
Cap to complete
the top level.
Use a Stacking
Joint for ground
level frames or
borders.
Use only Stacking
Joints when
creating additional
levels.
When creating a
multi-level frame
use a Stacking
Joint.
Stacking Joints fit
into the tops of other
Stacking Joints
Parts Identification
How the Joints Work
Special Instruction for bracketing timbers:
Connect brackets on the following quantity of
timbers like the diagram below.
12 PB bracketed timbers
PB
Stacking Joint