Instructions / Assembly
Introducing the ‘Frame-It-All’ 10.5 Circle Garden and Sandbox
For general assembly you can nd the instructions in the 2 Pack of Frame-it-all joints.
ECO-friendly
The framework utilizes our Curved Composite Plastic Timbers. Manufactured from 40% wood ber and 60% recycled polyethyl-
ene, the Eco-friendly durable composite wood grain plastic timbers never rot, warp or splinter. The cut to size timbers connect to
brackets with our patented Stacking Joints stakes.
Dimensions: 10.5’ x 10.5’ area
Installation Notes:
Before starting to assemble the 10.5 Circle Garden and Sand-
box, refer to the parts diagram to understand how to screw the
brackets onto the timbers. Remove the Stacking joints from the
plastic bags and lay out the parts. Each of the joints is com-
prised of a stake and two brackets, plus the necessary screws.
Tools Needed:
• Phillips head screwdriver (electric or battery preferred)
• Hammer
Screw bracket onto
composite timber
Two screws are
required per bracket
(1 on each side).
Use a Finishing
Cap to complete
the top level.
Use an Anchor
or Stacking Joint
for ground level
frames or borders.
Use only Stacking
Joints when
creating additional
levels.
When creating a
multi-level frame
use a Stacking
Joint.
Stacking Joints fit into
the tops of Anchor
Joints and other
Stacking
Joints
How the Joints Work
Parts Identification
Parallel bracketed
Stacking Joint
Curved timber
Special Installations:
Connect brackets parallel to
all 8 curved timbers as shown
in parts identication above.