Instructions / Assembly

Customer Service: 1800-914-9835 | [e-mail]
ASSEMBLY INSTRUCTIONS
Your animal barrier kit goes together by plugging the various tubes into the pivoting
connectors and connecting the netting with zip ties.
STEP 1: Install the left gate
Use connectors (parts
13, 5, 4 & 2) to form
the upper right hinge
on round tube (20) –
follow left diagram
STEP 2: Install the right gate
Connect L-connector (9)
with square tube (17)
Connect the other end of L-connector
with square tube (18)
Attach 2
nd
L-connector (9)
to the square tube (18)
Use connectors
(parts 7 & 21) to
form the lower
left hinge – follow
right diagram
Use connectors (parts
6, 8 & 21) to form the
lower right hinge –
follow left diagram
Use connectors
(parts 13, 3, 5 & 2)
to form the upper
left hinge on round
tube (20) – follow
right diagram
Connect L-connector
(9) with square tube
Attach 2
nd
L-connector
(9) to the square tube
(18)
Connect the other end of L-
connector with square tube (18)
Connect square tube (17, with has
the gate-latch) to both L-connectors