Operation Manual

Frama Matrix F32/F42/F62
64
10.3. Franking value/Credit
Display message
Cause
Remedy
High value not confirmed.
Security prompt.
Touch the postage value shown in-
verse in the display. You can change
the postage limit that activates the
message in the Setup 2 menu in Ad-
min mode.
Maximum Franking Value Exceeded !
Security prompt. The value
exceeds the maximum post-
age value.
You can change the postage limit that
activates the message in the Setup
2 menu in Admin mode.
Low Credit
The credit available in your
franking system has dropped
below the specified limit of
£100.00 (default amount).
Load new postage credit.
If necessary, change the warning limit
using the relevant function in Admin
mode.
Low Credit
and ink jet cassette
is almost empty.
The credit available in your
franking system has dropped
below the specified limit of
£100.00 (default amount). At
the same time the ink jet
cassette is almost empty.
Load new postage credit.
If necessary, change the warning limit
using the relevant function in Admin
mode.
Replace the ink jet cassette soon.
No Credit !
The remaining value of post-
age credit is not sufficient for
franking.
Load more postage credit onto the
system.
AutoConnect
Do you wish to connect automatically
with FramaOnline?
Data synchronization with the
Royal Mail.
See section 3.3. Inspec-
tion/AutoConnect on page 18.