Operation Manual

Frama Matrix F32/F42/F62

7.3. Setup 3 menu

Setup 3 menu can be only be called up in Admin mode.

7.3.1. Logo

Use this setting to define whether all cost centres have to work with the same logo or whether each

cost centre may use an individual logo (default = Logo CC).

Logo SYSTEM:

All cost centres automatically use the logo defined in Admin mode. The Admin

mode has an appropriate function in the Main Menu where you can define the logo.

Logo CC (default):

Each cost centre can use an individual logo. The logo is configured accordingly

each time a cost centre is called up.

7.3.2. Inserter Mode

The fixed Inserter mode can be specified using this setting (default = Inserter Mode CC).

System Inserter Mode:

The inserter mode operates in accordance with the setting in the Main Menu

in Admin mode.

CC Inserter Mode:

The inserter mode can be selected for each cost centre.

7.3.3. Reset Product on Log Off

This setting defines the behaviour of the start menu when a cost centre is changed (default = OFF).

Setting ON:

The current mail product is reset and must be re-entered when the cost centre is

changed.

Setting OFF:

The current product is retained when the cost centre is changed.