Operation Manual

Frama Matrix F32/F42/F62
52
7. Setup (settings)
You can adjust various settings for your Frama Matrix franking system in the Setup menu. Outside
Admin mode, you only have the Setup 1 menu available.
Press the “i“ key on the Main Menu twice. Then press the Spanner to access the Setup menu.
Calling up the Setup menu
Press “i“
Press “i“
Press spanner
Use the arrow key to access two further Setup menus in Admin mode. Press ESC to return.
7.1. Setup 1 menu
The description below lists the various functions and settings in the Setup 1
menu from top to bottom. Press the key for the function required and follow
the instructions on the screen.
7.1.1. Touch screen
Use this function to adjust the screen contrast to your requirements. Simply
press this key and use + or - to adjust to the desired contrast. Apply the modi-
fied setting by pressing ENTER.
Press the Colour Scheme key to define the colour scheme.
7.1.2. Language
Your Frama Matrix franking system has a number of languages built in. Switch to the language you
require using this function. The current setting is shown in the key. Changing language within a cost
centre only changes the operating language, it does not change the language of the tariff module.
An inspection loading must be run to also change the language for the tariff module. It is only pos-
sible to change the language for the tariff module in Admin mode.
7.1.3. System Info
This key displays a system overview. This information and the information in the status list provides
important input for our customer service.