Operation Manual

Frama Matrix F32/F42/F62

5.2.3. Printing message and text simultaneously

Your Frama Matrix franking system gives you the possibility of printing your

own text in addition to the selected message. You can set this function by

pressing Message & Text.

Tip

Caution If franking labels are used, only restricted utilization of this function is possible. Your

Frama Matrix franking system checks the length of the franking mark and will give you a cue

if the permissible total length is exceeded.

Press Message OFF to suppress printing of the message for the franking label

mark. As a result, the franking mark shows only the text message. Using the

same procedure, you can cancel printing of the text for the franking label

mark.

This setting is valid only for the process being carried out at the time.

5.2.4. Switching the message off

You can switch off the message by pressing the Message ON/OFF key if you

wish to frank your mail without any message or text.

Press the key again to switch the function back on.