Operation Manual

Frama Matrix F32/F42/F62
39
4.6.7.2. Connecting the franking system
Line up the franking system and the AF/AFS automatic feeder opposite one another as shown in
Figure 3. The connecting pins on the Matrix franking system must be inserted into the guide holes
in the automatic feeder. Familiarize yourself with the connecting pins on the franking system and
the guide holes in the feeder:
Figure 1: Matrix franking system with connecting pins
Figure 2: Automatic feeder with guide holes
Line up the franking system and the automatic feeder as shown in Figure 3 and then push the feed-
er carefully over the connecting pins.
Figure 3: Positioning of Matrix franking system and feeder
Figure 4: Feeder not yet locked.
Press the release button as shown in Figure 4 and push the AF automatic feeder firmly up against
the franking system housing. Let go of the release button. The feeder is now locked in place.
Figure 5: Pressing the release button