Operation Manual

Frama Matrix F32/F42/F62

4.6.3. Stack function

You can define a pre-selection counter with the Stack

function. The feeder feeds the preselected number of

mail items to be franked and then stops.

Press the Stack key in the Feeder menu to switch on the

function (Stack ON). Press the key again to switch off the

function.

Select the Stack mode using the Stack key in the start

menu.

Enter the number of mail items per stack. Start processing the stack by pressing OK or the number

entered.

When the stack is finished, you can restart the process by pressing OK or the number entered.

4.6.4. Inserter mode

The Inserter mode is a special function of the AF automatic feeder. This func-

tion is required for interaction with an inserter system. Press the Inserter

Mode key to enable this function. Press this key again to disable the function.

4.6.5 Seal Only/Count Only function

Depending on the letter sealer setting, you can count mail items without

franking (Count Only) or seal the items and simultaneously count them (Seal

Only). The Seal Only mode is only available when the letter sealer is switched

on.

No franking mark is printed. The mail items fed into the machine are counted

and sealed, as appropriate.